Danby SBWC033A1S Uživatelský manuál stáhnout pdf (Strana 10)

Occasionally, a problem may arise that is minor in nature, and a service call may not be necessary. Use this trou-

bleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or

Danby’s Toll Free Number 1-866-726-1150 for assistance.

PROBLEM POSSIBLE CAUSE SOLUTION

TROUBLESHOOTING

1) No power

2) Cabinet temperature too

high

3) Condensation on the

cabinet and/or doors

• A fuse in your home may be

blown or a circuit breaker

tripped.

• Power surge.

• Plug is not fully insterted into

wall outlet.

• Wrong temperature setting.

• Door not shut properly or

opened excessively.

• Interior lights toggled on.

• Recently added large

quantity of warm bottles to

cabinet.

• High humidity conditions in

the home.

• Replace fuse or reset circuit

breaker.

• Unplug the wine cooler, wait a

few seconds and plug back in.

• Make sure the 3-prong plug is

fully inserted into outlet.

• Verify the temperature control

setting; adjust if necessary.

• Ensure door is fully closed and

the gasket is sealing against

the cabinets. Open door only

as needed and for short

periods of time.

• The interior lights are intended

for temporary lighting of

cabinets for display purposes

only. They are not intended to

be left on for prolonged periods

of time.

• Limit quantity of warm bottles

introducted at the same time.

Stagger the load introduction if

possible.

• Ensure door is fully closed and

gasket is sealing against the

cabinet. Open the door only as

needed and for short periods of

time.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Komentáře k této Příručce

Žádné komentáře

Danby SBWC033A1S Uživatelský manuál Strana 10

Komentáře k této Příručce

Související produkty a manuály pro Nápojové chladiče Danby SBWC033A1S